This is one of our latest models, where the monitor powers up the camera down an all in one cable. This makes the system easy to fit and avoids canbus issues that may arise on normal systems due to taking power supplies for the camera from the reversing light.
This particular system uses the 7" Dash mounted monitor with the 1/3" Sharp 600TVL CCD Bracket Camera, this has polished stainless steel bracket and anti corrosion body (same camera as is used in some of the ultra expensive branded systems except we opted for the better image sensor and our monitor is digital lcd as opposed to analogue lcd). The camera has a stainless steel bracket , which is shown to last a very long time without corrosion unlike mild steel we have seen from most other retailers, which tends to rust in a matter of a few months. The monitor uses a Hi-Res digital panel screen with more than 3 times the amount of pixels of the standard analogue LCD screens most other retailers sell. Please note some sellers multiply the first number by 3 for RGB, if we were to do that it sounds even more impressive (2400x480).
We prefer to keep it simple but check carefully our competitors, the last number is normally better to go by as this is the number of vertical lines of pixels. Our systems work on either 12V or 24V , no switches it will adjust to the voltage automatically, this also protects the kit from any surges from the vehicle upto 32V, which is why we have such a good reliability record from these voltage protected kits. We supply with a 2 year Guarantee with us, meaning we will repair or replace any non-user damaged parts that are deemed faulty.
Our failure rate is very low even beyond these two years, if you have a problem outside of 2 years we should still have compatible parts and possible repairs for reasonable amounts. The parts of this kit will have been tested twice, once by the factory and once by us. We check all the items in the kit including all cables, trigger wires, IR leds and menu functions to reduce any chance of having a non working part. Our fault rate is extremely low, and we just like to ensure that we avoid any imperfection slipping past. This is why professional fitters love us.This monitor has a new menu system that allows you to choose individual channel mirror/rotation without changing the writing or the other channel. Allows a delay function to connect a side camera onto an indicator trigger wire. If you want to see the guidelines you can turn these on and off in the menu and even change the location of the guidelines and the numbers, plus change the display from ft to M. The guidelines will only work on the reversing channel and when the trigger wire for this channel is active. It won't bother you when driving forward and wanting to view the camera on all the time.
7 Colour LCD screen Audio Output: 0.5W Loudspeaker: one 15x40mm round loudspeaker Power supply: 12V/24V Power Consumption: 4W Max Digital Screen Resolution: 800 x3(RGB)x480 Contrast: 500:1 Brightness: 400cd/m2 Viewing Angle: U: 50 degrees/ D: 60 degrees, R/L: 70 degrees Operating Temperature: -10C to +65C Storage Temperature: -30C to +80C RH90% 2 Inputs PAL/NTSC/AUTO Mirror/Normal Switch on both channels Full function Remote Control. The item "Heavy Duty 7 Dash Monitor and polished Stainless Steel Bracket Reversing camera" is in sale since Friday, October 13, 2017. This item is in the category "Vehicle Parts & Accessories\In-Car Technology, GPS & Security\Parking Assistance\Parking Cameras".The seller is "cbeeeeee1111111" and is located in Ramsgate. This item can be shipped to United Kingdom, European Union member countries, Australia.